Canon EOS 5D Mark IV Setup Connectivity To Smartphones

The camera likewise turns into the first in the EOS 5D arrangement to include worked in Wi-Fi and Near-Field Communication (NFC) for the simple exchange of pictures and MP4 films to perfect cell phones, too remote shooting when utilizing the Canon Camera Connect App. It likewise incorporates an inherent GPS recipient with compass for exact geo-labeled data of scope, longitude, and rise.

Canon EOS 5D Mark IV Setup Connection To Smartphones

Canon EOS 5D Mark IV Setup Connection

Canon EOS 5D Mark IV Setup Connectivity To Smartphones, iphone, ipad, samsung note 7 etc.Communicating with a smartphone enables you to perform the following:
  • View images stored in the camera on a smartphone or save viewed images to a smartphone.
  • Operate the camera to take a picture or change camera settings using a smartphone.
  • Send images to a smartphone from the camera.
This section explains how to connect the camera directly to a smartphone via Wi-Fi.
  1. Install Camera Connect on the smartphone before setting up a connection .
  2. For procedures to send images to an NFC-enabled smartphone,
Connecting Metode
  • When the smartphone is NFC-enabled:You can easily set up a connection using the NFC function.
  • When the smartphone is not NFC-enable
Set up a connection by selecting Easy connection.
Smartphones labeled with the P mark are NFC-enabled. Some smartphones are not labeled with the P mark even if they are NFC enabled; if you do not know whether your smartphone is NFC-enabled, contact the manufacturer of the smartphone.

Canon EOS 5D Mark IV Connecting to an NFC enabled Smartphone

NFC-enabled smartphones can be connected by touching them to the camera. The operation flow is as follows.
  1. Turn on the camera and smartphone.
  2. Enable the NFC function on the camera and smartphone.
  3. Touch the smartphone to the camera so that they come into contact with each other.

Canon EOS 5D Mark IV camera’s NFC setting,

For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna position, refer to the smartphone’s instruction canon markiv manual.
1.Enable the NFC function on the camera and smartphone
2.Touch a smartphone to the camera.
  • If the download site of Camera Connect appears on the smartphone, install Camera Connect.
  • If an image is being played back on the camera, press the <3> button to end the playback.
  • Touch the P mark on the smartphone to that on the camera.
  • When a message indicating the connection is being established is displayed on the camera’s LCD monitor, move the smartphone away from the camera.
  • Camera Connect starts on the smartphone and establishes a connection.
3. Connect to the camera.
  1. When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone, this screen will not appear again.
  2. To specify viewable images, press the <B> button.
  3. Select [OK] and press <set>. After a message is displayed, the [Wi-Fi on] screen will appear.
  4. The main window of Camera Connect will be displayed on the smartphone.
  5. To return to the menu, press the<M> button.
  1. If necessary, also read “NFC Function Cautions”
  2. When touching the smartphone to the camera, be careful not to drop the camera or smartphone.
  3. Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone.
  4. Just holding the smartphone close to the mark may not establish a connection. Be sure to touch the mark with the smartphone so that they come into contact with each other.
  5. Recognition may be difficult depending on the smartphone. Touch slowly while changing the position or rotating horizontally.
  6. Another application on the smartphone may start depending on how you touch. Check the position of the P mark, then touch again.
  7. When touching the smartphone to the camera, do not leave anything between the camera and smartphone. In addition, when a case is attached to the camera or smartphone, communication may not be possible via NFC function.
  8. The camera cannot be connected to two or more smartphones at the same time.
  9. By default, the connection settings with the NFC function are saved as the fourth setting (a setting dedicated to NFC connection) under the name [SET4(NFC)]. When you connect the camera to another smartphone via NFC, [SET4(NFC)] will be overwritten.
  10. While connected, the camera’s auto power off does not function.


Canon EOS 5D Mark IV Connecting with Easy Connection

The camera EOS 5D mark iv and a smartphone can be directly connected via Wi-Fi. To establish connection, operations on the smartphone are required. For details, refer to the smartphone’s instruction manual.
  1. Install Camera Canon 5D mark 4 Connect on the smartphone
  2. Select [Communication settings]. Under the [4] tab, select [Communication settings], then press <set>.
  3. Select [Built-in wireless settings].
  4. Select (Wi-Fi function). Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function] If a screen for setting a nickname (for identification) appears, register a nickname .
  5. Select q (Connect to smartphone). Select [Easy connection].
  6. Select [OK] and press <set> to go to the next screen.
  7. Operate the smartphone and connect it to the camera. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) displayed on the camera’s LCD monitor. For the password, enter the encryption key displayed on the camera’s LCD monitor.
  8. Start Camera Connect on the smartphone. When the [Waiting to connect] screen is displayed on the camera’s LCD monitor, start Camera Connect on the smartphone.
  9. Select the camera to connect to on the smartphone. Select and tap the camera to connect to from [Cameras] on Camera Connect.
Advertismen

4 comments:

  1. This comment has been removed by the author.

    ReplyDelete
  2. This comment has been removed by the author.

    ReplyDelete
  3. Smartphones are considered mini computers, they are called Smartphones because they are able to very efficiently manage and edit the information that is on them.
    redmi 4 pro

    ReplyDelete
  4. There are number of companies available to help any time according to your convenience. Their technicians are very professional and able to handle difficulties at very affordable price.See This Helpful Information

    ReplyDelete