Canon EOS 5D Mark IV Wireless Setup Connection

Group today reported the 5D Mark IV, the fourth emphasis of the organization's prevalent full-outline DSLR camera initially propelled in 2005. It's the main Canon 5D to shoot 4K video, and it's additionally the initial 5D to accompany Wi-Fi network and a touchscreen. The 5D Mark IV will be accessible toward the beginning of September

Canon EOS 5D Mark IV Wireless Setup

First, set the camera Canon EOS 5D Mark IV nickname (for identification).When the Canon EOS 5D Mark IV Wireless Setup is connected to another device wirelessly, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot set the wireless functions.
  1. Select [Communication settings]. Press the <Menu> button, select [Communication settings] under the tab, and press
  2. Select [Built-in wireless settings].
  3. Select [Nickname]. When this setting is selected for the first time, a screen to register a nickname is displayed. Press <set> and proceed to step 4.
  4. Enter a nickname For instructions on entering characters, see the next page. When using the default nickname (the camera name), proceed to step 5. Otherwise, enter any characters between 1 to 10 characters in length.
  5. Exit the setting. When you are finished, press the <Menu> button. Select [OK] on the confirmation dialog and press <set> to return to the menu screen
The basic operation for using the EOS 5D Mark IV wireless functions is explained here. Follow the procedures below.
  1. Select [Communication settings]. Press the <Menu> button, select [Communication settings] under the tab, and press <set>.
  2. Select [Built-in wireless settings].
  3. Select [Wi-Fi/NFC].
  4. Select [Enable]. When a nickname (for identification) is not registered, a registration screen is displayed.
  5. [Wi-Fi function] is now selec table Select [Wi-Fi function].
  6. Select the Wi-Fi function to connect to. Use <5> or <9> to select an item, then press <set>
  • When the Canon EOS 5D mark iv wireless connection settings are not registered, the setting screen is displayed. When the connection settings are already registered, the reconnection screen is displaye
  • When using the NFC function, The [Built-in wireless settings] screen displayed in step 5 is the portal screen for setting the wireless functions.
  • Select an item and press <set> to display the setting screen, then specify the settings. On the [Built-in wireless settings] screen, you can set the following items:

Canon EOS 5D Mark IV Wi-Fi Function

Set whether to [Enable] or [Disable] the wireless functions. You can also set whether to enable or disable the NFC function.
  1. Set to [Enable] to enable the selection of [Wi-Fi function], [Send images to smartphone], and [Clear settings].
  2. When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable].
Wi-Fi function
The following Wi-Fi functions are available:
  1. Connect to smartphone
  2. Remote control (EOS Utility)
  3. Print from Wi-Fi printer
  4. Transfer images to FTP server
  5. Upload to Web service [Send images to smartphone]
While the camera is connected to a smartphone, use this function to send images stored in the camera to the smartphone.

Interface Cable Connection Cautions
  1. During a wireless LAN connection, you cannot use the camera by connecting it to Connect Station, a computer, a wireless file transmitter, or another device with a cable. Terminate the connection before connecting a cable.
  2. When the camera is connected to Connect Station, a computer, a wireless file transmitter, or another device with a cable, you cannot select [Built-in wireless settings]. Disconnect the cable before changing any settings.

Canon EOS 5D Mark IV with a Wireless Connection Established

When you want to prioritize the wireless connection, do not operate the power switch, card slot cover, battery compartment cover, or other parts. Otherwise, the wireless connection may be terminated.
Using an Eye-Fi Card
When [Wi-Fi/NFC] is set to [Enable], image transfer using an Eye-Fi card is disabled.

Canon EOS 5D Mark IV Using an NFC

Using an NFC-enabled smartphone or Connect Station enables you to do the following:
  1. Touch a smartphone to the camera to easily connect them wirelessly
  2. While playing back images on the camera, touch a smartphone to the camera to send a captured image to the smartphone
  3. Hold the camera close to Connect Station (sold separately) to easily connect them wirelessly
When using the NFC function, follow the steps below to set the camera’s NFC setting.
  1. Select [Communication settings]. Under the tab, select [Communication settings], then press <set>.
  2. Select [Built-in wireless settings].
  3. Select [Wi-Fi/NFC].
Add to NFC connections].
  1. Displayed when [Wi-Fi/NFC] is set to [Enable].
  2. Press the <info> button to add or remove . Add , then press<set>.
  3. When a nickname (for identification) is not registered, a registration screen is displayed
  4. When establishing wireless communications using the NFC function,
To use (Connect to smartphone), a smartphone on which iOS (iphone) or Android is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone.
  1. Camera Connect can be downloaded from the App Store or Google Play.
  2. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect.
  3. When an NFC-enabled smartphone is touched to the camera before installing Camera Connect, the download screen of Camera
  4. Connect will be displayed on the smartphone.
  5. Interface or functions of the camera and Camera Connect are subject to change for firmware update of the camera or application update of Camera Connect, iOS, Android, etc. In such a case, features of the camera or Camera Connect may differ from sample screens or operation instructions in this manual.
Advertismen

2 comments:

  1. Can my Canon 5DM4 connect wirelessly to I Pad?

    ReplyDelete
  2. yes you can, if there is wifi ipad you can direct to camera, to more clearly please read http://www.canoneosmanual.com/2016/08/canon-eos-5d-mark-iv-setup-connection.html in this web

    ReplyDelete