Canon EOS 80D Easy Connection To Smartphone

Sporting a new, higher-resolution 24MP sensor, a faster processor and a beefed-up 45-point AF system, the Canon 80D builds upon foundation laid out by the 70D and its excellent Dual Pixel CMOS AF technology. The 80D performs very well on multiple fronts, including better dynamic range and detail a lower ISOs, better higher ISO performance and more versatile autofocus. Despite a robust offering on the video side of things, it does lack a few of today's more popular features

Connecting the camera to a smartphone enables you to do the following:
  • View images stored in the camera on a smartphone or save viewed images to a smartphone.
  • Operate the camera to take a picture or change camera settings using a smartphone.
  • Send images to a smartphone from the camera.
  • Related setting Canon Eos 77D and Canon Eos 800D
This section explains how to connect the camera directly to a smartphone.
  • Install Camera Canon 80D Connect on the smartphone before setting up a connection
  • To connect using a Wi-Fi access point or connect manually in camera access point mode, see “Advanced Connection”
  • For procedures to send images to an NFC-enabled smartphone,
Canon EOS 80D Connection To Smartphone

Canon EOS 80D Easy Connection To Smartphone Method

Canon EOS 80D Connection To Smartphone if the smartphone is NFC-enabled: You can easily set up a connection using the NFC function.
1. When the smartphone is not NFC-enabled:
  • Set up a connection by selecting [Easy connection].
  • Smartphones labeled with the p mark are NFC-enabled. Some smartphones are not labeled with the mark even if they are NFC enabled;
  • if you do not know whether your smartphone is NFC-enabled, contact the manufacturer of the smartphone.


Canon EOS 80D Connecting Automatically with the NFC Function

Connect the camera and a smartphone (iphone) using the NFC function. The operation flow for connecting via NFC is as follows.
(1) Turn on the camera and smartphone.
(2) Enable the NFC function on the camera and smartphone.
(3) Touch the smartphone to the camera so that they come into contact with each other.
  • For the camera’s NFC setting,
  • For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna position, refer to the smartphone’s instruction manual.
1 Enable the NFC function on the camera and smartphone.
2 Touch a smartphone to the camera.
  • If an image is being played back on the camera, press the <play> button to end the playback.
  • Touch the mark on the smartphone to that on the camera.
  • When a message indicating the connection is displayed on the camera’s LCD monitor, move the smartphone away from the camera.
  • Camera Connect starts on the smartphone and establishes a connection.
3 Canon EOS 80D Connect to the camera.
  • When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone, this screen will not appear again.
  • To specify viewable images, press the <info> button. See step 5 on page 100 to set them.
  • Select [OK] and press <set>. After a message is displayed, the [Wi-Fi on] screen will appear.
  • The main window of Camera Connect will be displayed on the smartphone.
  • To return to the menu, press the <Menu> button.
The settings for connecting to a smartphone are now complete.
For operations after setting up a connection,
  • If necessary, also read “NFC Function Cautions”.
  • When touching the smartphone to the camera, be careful not to drop the camera or smartphone.
  • Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone.
  • Just holding the smartphone close to the mark may not establish a connection. Be sure to touch the mark with the smartphone so that they come into contact with each other.
  • Recognition may be difficult depending on the smartphone. Touch slowly while changing the position or rotating horizontally.
  • Another application on the smartphone may start depending on how you touch. Check the position of the p mark, then touch again.
  • When touching the smartphone to the camera, do not leave anything between the camera and smartphone. In addition, when a case is attached to the camera or smartphone, communication may not be possible via NFC function.
  • The camera cannot be connected to two or more smartphones at the same time.
  • By default, the connection settings via the NFC function are saved as the fourth setting (a setting dedicated to NFC connection) under the name [SET4(NFC)]. When you connect the camera to another smartphone via NFC, [SET4(NFC)] will be overwritten.
  • While connected, the camera’s auto power off does not function.

Canon EOS 80D Connecting with Easy Connection

The camera and a smartphone can be directly connected wirelessly. No access point is necessary, so you can establish a wireless connection easily. To establish connection, operations on the smartphone are required.

Canon EOS 80D Connection To Smartphone
1 Select [Wireless communication settings].
  • Under the tab, select [Wireless communication settings], then press <set>.
2 Select [Wi-Fi function].
  • Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function].
3 Select [smartphone] (Connect to smartphone).
4 Select [Easy connection].
  • Select [OK] and press <set> to go to the next screen.
5 Operate the smartphone and connect it to the camera.
  • Activate the smartphone’s Wi-Fi function, then select the SSID (network name) displayed on the camera’s LCD monitor.
  • For the password, enter the encryption key displayed on the camera’s LCD monitor.
6 Start Camera EOS 80D Connect on the smartphone.
  • When the [Waiting to connect] screen is displayed on the camera’s LCD monitor, start Camera Connect on the smartphone.
7 Select the camera to connect to on the smartphone.
  • Select and touch the camera to connect to from [Cameras] on Camera Connect.
8 Connect to the camera.
  • When a connection is established, the screen on the left will appear on the camera’s LCD monitor.
  • To specify viewable images, press the <info> button. See step 5 on page 100 to set them.
  • Select [OK] and press <set>. After a message is displayed, the [Wi-Fi on] screen will appear.
  • The main window of Camera Connect will be displayed on the smartphone.
  • To return to the menu, press the <Menu> button.
The settings for connecting to a smartphone are now complete.

Advertismen

0 komentar:

Post a Comment