How To Settings Eye-Fi Card Canon Eos Rebel T6

The Canon Eos Rebel T6 With a commercially-available Eye-Fi card already set up, you can automatically transfer captured images to a computer or upload them to an online service via a wireless LAN.
The image transfer is a function of the Eye-Fi card. For Settings Eye-Fi Card Canon Eos Rebel T6 instructions on how to set up and use the Eye-Fi card or to troubleshoot any image transfer problems, refer to the Eye-Fi card’s instruction manual or contact the card manufacturer.


Settings Eye-Fi Card Canon Eos Rebel T6

Settings Eye-Fi Card Canon Eos Rebel T6

The camera Canon Eos Rebel T6 is not guaranteed to support Eye-Fi card functions (including wireless transfer). In case of a problem with an Eye-Fi card, please check with the card manufacturer. Also note that approval is required to use Eye-Fi cards in many countries or regions. Without approval, use of the card is not permitted. If it is unclear whether the card has been approved for use in your area, please check with the card manufacturer.

1 Insert an Eye-Fi card.
2 Select [Eye-Fi settings].


  • Under the tab, select [Eye-Fi settings], then press <set>.
  • This menu is displayed only when an Eye-Fi card is inserted into the camera.
3 Enable Eye-Fi transmission.
  • Select [Eye-Fi trans.], then press <set>.
  • Select [Enable], then press <set>.
  • If you set [Disable], there will be no automatic transmission even with the Eye-Fi card inserted
4 Display the connection information.
    Settings Eye-Fi Card Canon Eos Rebel T6
  • Select [Connection info.], then press <set>.
5 Check the [Access point SSID:].
  • Check that an access point is displayed for [Access point SSID:].
  • You can also check the Eye-Fi card’s MAC address and firmware version.
  • Press the <Menu> button three times to exit the menu.
6 Take the picture.
  • The picture is transferred and the icon switches from gray (not connected) to one of the icons below.
  • For transferred images, is displayed in the shooting information display.
(Gray) Not connected : No connection with access point.
(Blinking) Connecting... : Connecting to access point.
(Illuminated) Connected: Connection to access point established.
Transferring... : Image transfer to access point in progress.


Advertismen

0 komentar:

Post a Comment