Canon Eos 77D Setup Bluetooth Connection To Smartphone

The Canon EOS 77D (EOS 9000D in Japan) is a midrange DSLR that sits between the Rebel T7i and EOS 80D. It elements Canon's commonplace 24MP CMOS sensor and utilizations the organization's most up to date DIGIC 7 processor. Double Pixel AF is implicit for responsive AF and great subject following in live video and motion picture mode and, for shooting with the optical viewfinder, there's a 45-point all cross-sort framework. The camera has a completely articulating 3" touchscreen LCD alongside an OVF with 95% scope. It can catch Full HD video at 60p at a maximum piece rate of 60Mbps. Remote components incorporate Wi-Fi, NFC and Bluetooth.

This section describes how to connect the camera eos 77D to a Bluetooth compatible smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following:
  • View images stored in the camera on a smartphone or save viewed images to a smartphone.
  • Operate the camera to take a picture or change camera settings using a smartphone.
  • Send images to a smartphone from the camera.
  1. Install Camera Connect on the smartphone before setting up a connection.
  2. For procedures to connect to an NFC-compatible smartphone via Wi-Fi, see “Connecting to an NFC compatible Smartphone via Wi-Fi”.
  3. If the smartphone you want to connect to via Wi-Fi is not Bluetooth-compatible or NFC-compatible,
  4. To connect via Wi-Fi using a Wi-Fi access point, see “Advanced Wi-Fi Connection”.

Canon Eos 77D Setup Bluetooth Connection To Smartphone
Canon Eos 77D Setup Bluetooth Connection

When you connect the camera eos 77D to a Bluetooth compatible smartphone via Bluetooth, you can establish a Wi-Fi connection by operating only the camera or the smartphone. That pairing between the camera and smartphone is required to connect the camera to a smartphone via Bluetooth. Pairing will be done as part of the Bluetooth connection procedure.
  • Pairing and Bluetooth connection are not possible if the camera is connected to Connect Station, a computer, a GPS receiver, or another device with an interface cable.
  • Pairing is not possible while shooting with the camera.
  • The camera cannot be connected to two or more devices at the same time via Bluetooth.
  • If you connect the camera to a smartphone via Wi-Fi while the camera is connected to Wireless Remote Control BR-E1 (sold separately) via Bluetooth, the Bluetooth connection with the wireless remote controller will be terminated.
  • Bluetooth connection consumes battery power even after the camera’s auto power off has activated. Therefore, the battery level may be low when you use the camera.
  • The Bluetooth connection will be terminated if you turn off the camera or smartphone, but when you turn on the power, the Bluetooth connection will resume for the same combination of camera and smartphone.
  • This camera can be connected to Wireless Remote Control BR-E1 via Bluetooth for remote shooting. For details, refer to Wireless Remote Control BR-E1 Instruction Manual.

Canon Eos 77D Establishing a Bluetooth Connection

To connect the camera Canon Eos 77D to a smartphone via Bluetooth, refer to the Camera Connect’s “Easy Connection Guide” or follow the steps below. Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in advance

1 Select [Wireless communication settings].
  • Press the <Menu> button, select [Wireless communication settings] under the [Function Settings]tab, then press <set>.
will be displayed on the camera’s LCD panel.
2 Select [Bluetooth function].
3 Select [Bluetooth function].
4 Select [Smartphone].
5 Select [Pairing].
6 Select [Do not display].
  • If Camera Connect is already installed, select [Do not display] and press <set>.
  • If Camera Connect is not installed, select [Android] or [iOS] on the screen on the left, scan the displayed QR code with the smartphone, then access Google Play or the App Store and install Camera eos 77D Connect.
  • The screen on the left will appear and pairing will start. Operation on the Smartphone
7 Activate the smartphone’s Bluetooth function.
8 Start Camera Connect.
9 Select the camera to pair with.
  • Tap on the nickname of the camera to be paired.
  • When the screen on the left appears, tap on [Pair].
Operation on the Camera-2
10 Select [OK].
11 Press <set>.
  • Pairing will complete and the camera will be connected to the smartphone via Bluetooth.
  • An illustration indicating that a Bluetooth connection has been established will appear on Camera eos 77D Connect. With a Bluetooth connection established, you can operate the camera to send images to the smartphone.

Canon Eos 77D Setup Bluetooth Connection To Smartphone
Canon Eos 77D Establishing a Wi-Fi Connection

Canon Eos 77D setup Bluetooth connection to smartphone is established, follow the steps below to establish a Wi-Fi connection.
Set [Wi-Fi] to [Enable] on the [Wi-Fi settings] screen in advance

1 Select a Camera Connect function
  • Select the Camera Connect function you want to use.
  • For the Camera Connect functions,
  • A Wi-Fi connection will be established automatically.
  • When a Wi-Fi connection is established, the screen for the selected function will appear.iOS
2 Check the SSID and password.
  • Check the SSID (network name) and password displayed on the camera.
3 Operate the smartphone to establish a Wi-Fi connection.
  • On the smartphone’s Wi-Fi function screen, select the SSID checked in step 2.
  • For the password, enter the password checked in step 2. The password will not be required from the next time you connect the camera to the smartphone via Wi-Fi.
  • Camera Connect will appear.
  • When a Wi-Fi connection is established, the screen for the selected function will appear.

Canon Eos 77D Connection Android and iOS

  • The [Wi-Fi on] screen will appear on the camera’s LCD monitor.
  • An illustration indicating that a Wi-Fi connection has been established will appear on Camera Connect.
  • The Wi-Fi connection to a Bluetoothcompatible smartphone is now complete.
  • For how to terminate the Wi-Fi connection,
  • Terminating the Wi-Fi connection will switch the camera to the Bluetooth connection.
  • To reconnect via Wi-Fi, [Wi-Fi on] Screen [Disconnect,exit]
  • Terminates the Wi-Fi connection.
[Confirm set.]
  • You can check the settings.
[Error details]
  • When a Wi-Fi connection error occurs, you can check the details of the error. To switch to the menu, press the <Menu> button.

Operating the Camera Eos 77D Using a Smartphone

You can use a smartphone with Camera Connect installed to view images stored in the camera or perform remote shooting, etc.

Camera Connect Main Window

The main functions of Camera Connect are described below.
[Images on camera]
  • Images stored in the camera can be viewed.
  • Images stored in the camera can be saved on a smartphone.
  • Operations such as deletion can be performed on images stored in the camera.
[Remote live view shooting]
  • The camera’s Live View image can be viewed on a smartphone.
  • You can shoot with remote operation.
[Location information]
  • Not supported on this camera.
[Camera settings]
  • Camera settings can be changed.

Canon Eos 77D Terminating the Wi-Fi Connection

To terminate the Wi-Fi connection, perform either of the following operations.
  • On the smartphone’s Camera Connect screen, tap on [x].
  • On the camera’s [Wi-Fi on] screen, select [Disconnect,exit].
  • If the [Wi-Fi on] screen is not displayed, press the <wifi> button.
  • Select [Disconnect,exit], then select [OK] on the confirmation dialog to terminate the Wi-Fi connection.
[Check/clear connection info]
  • You can check the name and communication status of the paired device.
  • To remove the paired device, press the <info> button.

Removing a Paired Device’s Registration

To pair the camera with another smartphone, remove the currently paired device’s registration.
1 Select [Check/clear connection info].
  • On the [Bluetooth function] screen, select [Check/clear connection info], then press <set>.
2 Press the <info> button.
3 Remove the device registration.
  • When the screen on the left appears, select [OK], then press <set>.
4 Remove the camera registration.
  • Remove the camera registration in the Bluetooth settings.
Advertismen

0 komentar:

Post a Comment