Canon Eos 77D Wireless Setup Guide

The EOS 77D camera can transfer photos and videos to and from compatible devices, upload directly to various web services and more. Built-in NFC technology means it can connect directly to compatible devices by simply touching the NFC icon on the camera to the device.

Bluetooth technology lets you easily pair the EOS 77D with a compatible smartphone using the free Canon Camera Connect app. You can also establish a direct Wi-Fi connection to use your phone as a viewfinder, and check and download previously captured photos and videos

Canon Eos 77D Wireless Setup
Canon Eos 77D Canon Eos 77D Wireless Setup

To start Canon Eos 77D Wireless Setup with, check if the access point supports WPS that allows easy Wi-Fi connection between Wi-Fi devices. If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation.

Canon Eos 77D Wi-Fi Protected Setup

1.When WPS is supported
The following two Wi-Fi connection methods are available. Connection can be established easier with WPS (PBC mode).
• Establishing a Wi-Fi connection with WPS (PBC mode): Perform the operations described on wards.
• Establishing a Wi-Fi connection with WPS (PIN mode): Perform the operations described on wards.

2. When WPS is not supported
  • Connecting to a detected network manually via Wi-Fi: Perform the operations described
Access Point Encryption
This camera eos 77D supports the following options for [Authentication] and [Encryption settings]. Therefore, when connecting to a detected network manually via Wi-Fi, the encryption used by the access point must be one of the following.
  • [Authentication]: Open system, Shared key, or WPA/WPA2-PSK
  • [Encryption settings]: WEP, TKIP, or AES

Canon Eos 77D Establishing a Wi-Fi Connection with WPS (PBC Mode)

This is a Wi-Fi connection mode available when using an access point compatible with WPS. In push button connection mode (PBC mode), the camera canon eos 77D and the access point can be connected via Wi-Fi simply by pressing the WPS button on the access point.
  • If multiple access points are active in the surrounding area, it may be more difficult to establish a Wi-Fi connection. In such a case, try using [WPS (PIN mode)] to establish a Wi-Fi connection.
  • Check the position of the WPS button on the access point in advance.
  • It may take approx. one minute to establish a Wi-Fi connection.
1 Press the <wifi> button.
2 Select an item.
  • If the history is displayed, switch the screen with the <L> <R> keys.
  • If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings.
  • Press the <Up> <Down> or <L> <R> keys to select an item, then press<set>.
  • For (Transfer imgs between cameras), see “Connecting to Another Camera via Wi-Fi”.
  • Depending on the selected Web service, the [Send to] screen is displayed. Select a destination.
3 Select [Register a device for connection].
  • Not displayed when a Web service is selected in step 2. Proceed to step 5.
  • When [smartphone] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display] and press <set>.
4 Select [Switch network].
5 Select [Connect with WPS].
6 Select [WPS (PBC mode)].
  • Select [OK] and press <set> to go to the next screen.
  • Related setting wifi canon eos 800D, canon eos Rebel T7i
7 Connect to the access point via Wi-Fi.
  • Press the access point’s WPS button. For details about where the button is located and how long to press it, refer to the access point’s instruction manual.
  • Select [OK] and press <set> to establish a Wi-Fi connection with the access point.
  • When a Wi-Fi connection with the access point is established, the next screen is displayed.
8 Select [Auto setting].
  • Select [OK] and press <set> to display the setting screen for the Wi-Fi function selected in step 2.
  • If [Auto setting] results in an error or if you want to specify the settings manually,.

Canon Eos 77D Wireless Setup
Canon Eos 77D Establishing a Wi-Fi Connection with WPS (PIN Mode)

This is a Canon Eos 77D Wireless Setup connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number specified on the camera is set at the access point to establish a Wi-Fi connection.
  • Even if there are multiple access points active in the surrounding area, a relatively reliable Wi-Fi connection can be established using this shared identification number.
  • It may take approx. one minute to establish a Wi-Fi connection.
1 Press the <wifi> button.
2 Select an item.
  • If the history is displayed, switch the screen with the <L> <R> keys.
  • If the [Wireless communication settings] screen is displayed, set the Wi-Fi settings.
  • Press the <Up> <Down> or <L> <R> keys to select an item, then press <set>.
  • For (Transfer imgs between cameras),
  • Depending on the selected Web service, the [Send to] screen is displayed. Select a destination .
3 Select [Register a device for connection].
  • Not displayed when a Web service is selected in step 2. Proceed to step 5.
  • When [smarphone] (Connect to smartphone) is selected, the screen on the left is displayed. If Camera Connect is already installed, select [Do not display] and press <set>.
4 Select [Switch network].
5 Select [Connect with WPS].
6 Select [WPS (PIN mode)].
  • Select [OK] and press <set> to go to the next screen.
7 Specify the PIN code at the access point.
  • At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor.
  • For instructions on setting PIN codes at the access point, refer to the access point’s instruction manual.
  • After the PIN code is specified, select [OK] and press <set>.
8 Connect to the access point.
  • Select [OK] and press <set> to establish a Wi-Fi connection with the access point.
  • When a Wi-Fi connection with the access point is established, the next screen is displayed.
9 Select [Auto setting].
  • Select [OK] and press <set> to display the setting screen for the Wi-Fi function selected in step 2.
  • If [Auto setting] results in an error or if you want to specify the settings manually,.


Advertismen

0 komentar:

Post a Comment