Canon Eos 800D Wireless Setup Guide

The Camera Canon Eos 800D Connect App is your go to application when you want to wirelessly shoot and transfer photos via wi-fi to your favourite social media sharing platforms or mobile devices. It combines the original Camera 800D Window and EOS Remote applications. The Canon EOS 800D, known in the Americas as the EOS Rebel T7i and in Japan as the EOS Kiss X9i

This section mainly explains how to connect using a Wi-Fi access point. When you connect to a Wi-Fi access point, you can use the following functions:
  • Connecting to a smartphone
  • Operating remotely using EOS Utility
  • Printing images using a Wi-Fi printer
  • Viewing images using a media player
  • Sending images to a Web service

Canon Eos 800D Wireless Setup
Canon Eos 800D Wireless Setup Checking the Type of Access Point

Canon Eos 800D Wireless Setup to start with, check if the access point supports WPS that allows easy connection between Wi-Fi devices. This setup for camera 800D wifi connection to computer or smartphone. If you do not know if the access point you use is WPS-compatible, refer to the access point eos T7i-800D instruction manual or other documentation.

1. When WPS is supported
The following two connection methods are available. Connection can be established easier with WPS (PBC mode).
  • Connecting via WPS (PBC mode): Perform the operations described
  • Connecting via WPS (PIN mode): Perform the operations described
2.When WPS is not supported
  • Connecting to a detected network manually: Perform the operations described

Canon Eos 800D Wireless Setup Access Point Encryption

This camera Canon Eos 800D supports the following options for [Authentication] and [Encryption settings]. Therefore, when connecting to a detected network manually, the encryption used by the access point must be one of the following.
  • [Authentication]: Open system, Shared key, or WPA/WPA2-PSK
  • [Encryption settings]: WEP, TKIP, or AES

Canon Eos 800D Wireless Setup Connecting via WPS (PBC Mode

This is a connection mode available when using an access point compatible with WPS. In pushbutton connection mode (PBC mode), the camera Canon 800D and the access point can be connected simply by pressing the WPS button on the access point.
  • If multiple access points are active in the surrounding area, it may be more difficult to establish a connection. In such a case, try using [WPS (PIN mode)] to establish a connection.
  • Check the position of the WPS button on the access point in advance.
  • It may take approx. one minute to establish a connection.
1 Select [Wireless communication settings].
  • Under the tab, select [Wireless communication settings], then press <set>.
2 Select [Wi-Fi function].
  • Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function
3 Select an item.
  • Press the <Up> <Down> or <L> <R> keys to select an item, then press <set>.
  • When selecting [camera] (Transfer imgs between cameras), see “Easy Connection to smartphone” .
  • When you select [web] (Upload to Web service), a screen to select a Web service is displayed. Select a Web service and press <set>.
  • Depending on the selected Web service, the [Send to] screen is displayed. Select a destination.
4 Select [Select a network].
  • Displayed when [smartphone], [computer], or [printer] is selected in step 3. Go to step 5 when selecting [computer] or [web].
  • Select [OK] and press <set> to go to the next screen.
5 Select [Connect with WPS].
6 Select [WPS (PBC mode)].
  • Select [OK] and press <set> to go to the next screen.
7 Connect to the access point.
  • Press the access point's WPS button. For details about where the button is located and how long to press it, refer to the access point's instructionn manual.
  • Select [OK] and press <set> to establish a connection with the access point.
  • When a connection with the access point is established, the next screen is displayed
8. Select [Auto setting].
  • Select [OK] and press <set> to display the setting screen for the Wi-Fi function selected in step 3.
  • If [Auto setting] results in an error or if you want to specify the settings manually, .
The IP address can only be set automatically in environments using DHCP servers, or access points or routers with DHCP server functionality, such that IP addresses and related settings are assigned and configured automatically.

Canon Eos 800D Wireless Setup
Canon Eos 800D Wireless Setup Connecting via WPS (PIN Mode)

This is a connection mode available when using an access point compatible with WPS. In PIN code connection mode (PIN mode), an 8-digit identification number specified on the Eos 800D is set at the access point to establish a connection.
  • Even if there are multiple access points active in the surrounding area, a relatively reliable connection can be established using this shared identification number.
  • It may take approx. one minute to establish a connection
1 Select [Wireless communication settings].
  • Under the tab, select [Wireless communication settings], then press <set>.
2 Select [Wi-Fi function].
  • Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function].
3 Select an item.
  • Press the <Up> <Down> or <L> <R> keys to select an item, then press <set>.
  • When selecting [camera] (Transfer imgs between cameras),
  • When you select [web] (Upload to Web service), a screen to select a Web service is displayed. Select a Web service and press <set>.
  • Depending on the selected Web service, the [Send to] screen is displayed. Select a destination
4 Select [Select a network].
  • Displayed when [smartphone], [computer], or [printer] is selected in step 3. Go to step 5 when selecting [computer] or [web].
  • Select [OK] and press <set> to go to the next screen.
5 Select [Connect with WPS].
6 Select [WPS (PIN mode)].
  • Select [OK] and press <set> to go to the next screen.
7 Specify the PIN code at the access point.
  • At the access point, specify the 8-digit
  • PIN code displayed on the camera's LCD monitor.
  • For instructions on setting PIN codes at the access point, refer to the access point’s instruction manual.
  • After the PIN code is specified, select [OK] and press <set>.
8 Connect to the access point.
  • Select [OK] and press <set> to establish a connection with the access point.
  • When a connection with the access point is established, the next screen is displayed.
9 Select [Auto setting].
  • Select [OK] and press <set> to display the setting screen for the Wi-Fi function selected in step 3
  • If [Auto setting] results in an error or if you want to specify the settings manually,
Canon Eos 800D Wireless Setup

Canon Eos 800D Connecting to a Detected Network Manually

Establish Canon Eos rebel T7i  Wireless Setup connection to iphone,ipad or computer by selecting the SSID (or ESS-ID) of the access point to connect to from a list of active access points nearby.
1 Select [Wireless communication settings].
  • Under the tab, select [Wireless communication settings], then press <set>.
2 Select [Wi-Fi function].
  • Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function].
3 Select an item.
  • Press the <Up> <Down> or <L> <R> keys to select an item, then press <set>.
  • When selecting [camera] (Transfer imgs between cameras),
  • When you select [web] (Upload to Web service), a screen to select a Web service is displayed. Select a Web service and press <set>.
  • Depending on the selected Web service, the [Send to] screen is displayed. Select a destination
4 Select [Select a network].
  • Displayed when [smartphone], [computer], or [printer] is selected in step 3. Go to step 5 when selecting [computer] or [web].
  • Select [OK] and press <set> to go to the next screen.
5 Select an access point.
  • Press the <L> <R> keys to select the access point to connect to from the list of access points.
  • (1) SSID
  • (2) An icon is displayed if the access point is encrypted
  • (3) Channel used
  • [Refresh] and [Manual settings]
  • Scroll down the screen in step 5 to display [Refresh] and [Manual settings].
  • To search for access points again, select [Refresh].
  • To configure settings for the access point manually, select [Manual settings]. Enter the SSID using the virtual keyboard and then configure settings following the instructions displayed.
  • Enter the encryption key (password) specified for the access point. For details on the specified encryption key, refer to the access point’s instruction manual.
  • The screens displayed in steps 6 to 8 below vary depending on the authentication and encryption specified for the access point.
  • Go to step 9 when the [IP address set.] screen is displayed instead of the screens for steps 6 to 8.
6 Select a key index.
  • The [Key index] screen is displayed only if WEP encryption is used by the access point.
  • Select the key index number specified for the access point, then press <Set>.
  • Select [OK] and press <set> to go to the next screen.
7 Select the format and the number of characters used for the key.
  • Select [OK] and press <set> to go to the next screen.
8 Enter the encryption key.
  • Enter the encryption key using the virtual keyboard, then press the <Menu> button.
  • The [IP address set.] screen will be displayed.
9 Select [Auto setting].
  • Select [OK] and press <set> to display the setting screen for the Wi- Fi function selected in step 3
  • If [Auto setting] results in an error or if you want to specify the settings manually,
Advertismen

0 komentar:

Post a Comment