Canon EOS M6 Printing Image

Canon EOS M6 Printing Image, your shots can easily be printed by connecting the camera to a printer. On the camera, you can specify images to set up batch printing, prepare orders for photo development services, and prepare orders or print images for photobooks.
A Canon SELPHY CP series compact photo printer is used here for the sake of illustration. Screens displayed and available functions vary by printer. Also refer to the printer manual for additional information.
Canon EOS M6 Printing Image

Canon EOS M6 Printing Image

How to print Canon EOS M6...? Easily print your shots by connecting the camera to a PictBridge-compatible printer (sold separately) with a USB cable (sold separately; camera end: Micro-B).

1 Make sure the camera Eos M6 and printer are off.
2 Connect the camera to the printer.
  • Open the terminal cover. Holding the smaller cable plug in the orientation shown, insert the plug fully into the camera terminal.
  • Connect the larger cable plug to the printer. For other connection details, refer to the printer manual.
3 Turn the printer on.

4 Turn the camera on. Before Use
  • Move the power switch to [ON].
5 Choose an image.
  • Press the [L][R] buttons or turn the [gear] dial to choose an image.
6 Access the printing screen.
  • Press the [set] button, choose [print], and press the [set] button again.
7 Print the image.
  • Press the [up][down] buttons or turn the [gear] dial to choose [Print], and then press the [set] button.
  • Printing now begins.
  • To print other images, repeat the above procedures starting from step 5 after printing is finished.
  • When you are finished printing, turn the camera and printer off and disconnect the cable.

Canon EOS M6 Configuring Print Settings

1 Access the printing screen.
  • Follow steps 1 – 6 in to access this screen.
2 Configure the settings.
  • Press the [up][down] buttons or turn the [gear] dial to choose an item, and then press the [set] button. On the next screen, choose an option (either press the [up][down] buttons or turn the [gear] dial), and then press the [set] button to return to the printing screen.
By cropping images before printing, you can print a desired image area instead of the entire image.

1 Choose [Cropping].
  • After following step 1 in to access the printing screen, choose [Cropping] and press the [set] button.
  • A cropping frame is now displayed, indicating the image area to print.
2 Adjust the cropping frame as needed.
  • To resize the frame, turn the [ Gear] dials.
  • To move the frame, press the [up][down ][L][R] buttons.
  • To rotate the frame, press the [INFO] button.
  • When finished, press the [set] button.
3 Print the image.
Canon EOS M6 Printing Image

Canon EOS M6 Printing Images Wirelessly from a Connected Printer

Connect the camera Canon EOS M6 to a printer via Wi-Fi to print as follows.
These steps show how to use the camera as an access point, but you can also use an existing access point
1 Access the Wi-Fi menu.
  • Move the power switch to [ ON].
  • Press the [ ] button.
2 Choose [print logo].
  • Press the [Up][Down][L][R] buttons or turn the [ Mode Dial] dial to choose [print ], and then press the [set] button.
3 Choose [Add a Device].
  • Press the [up][down] buttons or turn the [gear] dial to choose [Add a Device], and then press the [print] button.
  • The camera SSID and password are displayed.
4 Connect the printer to the network. Before Use
  • In the printer’s Wi-Fi setting menu, choose the SSID (network name) displayed on the camera to establish a connection.
5 Choose the printer.
  • Choose the printer name (either press the [up][down] buttons or turn the [gear] dial), and then press the [set] button.
6 Choose an image to print.
  • Press the [L][R] buttons or turn the [Gear] dial to choose an image.
  • Press the [ set] button, choose [print], and press the [set] button again.
  • Press the [L][R] buttons or turn the [gear] dial to choose [Print], and then press the [set] button.
  • For detailed printing instructions,
  • To end the connection, press the [up] button, choose [OK] on the confirmation screen (either press the [L][R] buttons or turn the [ gear] dial), and then press the [set] button.
Advertismen

0 komentar:

Post a Comment