How To Connect Canon Eos 800D To an NFC smartphone via Wi-Fi

This section describes how to connect the Canon Eos 800D to an NFC-compatible smartphone via Wi-Fi. Connecting to a smartphone via Wi-Fi enables you to perform the following:
  • View images stored in the camera on a smartphone or save viewed images to a smartphone.
  • Operate the camera to take a picture or change camera settings using a smartphone.
  • Send images to a smartphone from the camera. 
How To Connect Canon Eos 800D To an NFC smartphone via Wi-Fi
To connect the camera Eos 800D / Rebel T7i to a smartphone, a smartphone on which Android or iOS is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone.
  1. Camera Connect can be installed from the Google Play or App Store. The Google Play or App Store can also be accessed using the QR codes that appear when connecting the camera to a smartphone.
  2. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect. 
  3. When an NFC-compatible smartphone is touched to the camera before installing Camera Connect, the download screen of Camera Connect will be displayed on the smartphone.
  4. Interface or functions of the camera and Camera Connect are subject to change for firmware update of the camera or application update of Camera Connect, Android, iOS, etc. In such a case, features of the camera or Camera Connect may differ from sample screens or operation instructions in this manual.
How To Connect Canon Eos 800D To an NFC smartphone via Wi-Fi

Canon Eos 800D Connecting to an NFC-compatible Smartphone via Wi-Fi

  1. Install Camera Connect on the smartphone before setting up a connection.
  2. For procedures to connect to a Bluetooth-compatible smartphone via Wi-Fi, see “Connecting to a Bluetoothcompatible Smartphone via Wi-Fi”.
  3. If the smartphone you want to connect to via Wi-Fi is not Bluetooth-compatible or NFC-compatible, see Connecting to a Smartphone via Wi-Fi .
  4. To connect via Wi-Fi using a Wi-Fi access point, see Wi-Fi Setup Connection .
  5. Wi-Fi Connection to an NFC-compatible Smartphone

Wi-Fi Connection to an NFC-compatible Smartphone

NFC-compatible smartphones can be connected via Wi-Fi by touching them to the camera Canon Eos 800D.
  1. Smartphones labeled with the p mark are NFC-compatible.
  2. Some smartphones are NFC-compatible even if they are not labeled with the p mark. In such a case, check the NFC antenna position by referring to the smartphone’s instruction manual.
  3. For the smartphone’s NFC setting, refer to the smartphone’s instruction manual.
  4. If you do not know whether your smartphone is NFC-compatible, contact the manufacturer of the smartphone. The camera cannot be connected to two or more smartphones at the same time.
  5. When touching the smartphone to the camera, be careful not to drop the camera or smartphone.
  6. Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone.
  7. Just holding the smartphone close to the camera may not establish a connection. Be sure to touch the camera with the smartphone so that they come into contact with each other.
  8. Recognition may be difficult depending on the smartphone. Touch slowly while changing the position or rotating horizontally. If connection is not established, keep the camera and smartphone together until the camera screen is updated.
  9. Another application on the smartphone may start depending on how you touch. Check the position of the p mark, then touch again.
  10. When touching the smartphone to the camera, do not leave anything between the camera and smartphone. In addition, when a case is attached to the camera or smartphone, Wi-Fi connection with the NFC function may not be possible.

NFC Function Cautions

  1. A Wi-Fi connection cannot be established with the NFC function between this camera and a smartphone while they are connected via Bluetooth.
  2. To connect this camera to an NFC-compatible smartphone via Wi-Fi, the smartphone’s Wi-Fi and NFC functions must be enabled. NFC Function Cautions
  3. A Wi-Fi connection cannot be established with the NFC function between this camera and another NFC-compatible device such as a camera or printer.
  4. A Wi-Fi connection cannot be established with the NFC function while shooting with this camera, when there is no card, when the LCD monitor is closed with the screen facing inward, or while the camera is connected to another device with an interface cable.

Canon Eos 800D Establishing a Wi-Fi Connection

To connect the canon eos rebel T7i to an NFC-compatible smartphone via Wi-Fi, refer to the Camera Connect’s follow the steps below.
  • Turn on the camera and smartphone.
  • Enable the NFC function on the camera and smartphone.
  • Touch the smartphone to the camera so that they come into contact with each other.
    1 Enable the NFC function on the camera and smartphone.
    2 Touch a smartphone to the camera.
    • If the download site of Camera Connect appears on the smartphone, install Camera Connect
    • If an image is being played back on the camera, press the <play> button to end the playback.
    • Touch the p mark on the smartphone to that on the camera so that they come into contact with each other.
    • When a message indicating the connection is being established is displayed on the camera’s LCD monitor, move the smartphone away from the camera.
    • Camera Connect starts on the smartphone and establishes a connection.
    3 Establish a Wi-Fi connection.
    • When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone via NFC, this screen will not appear again.
    • To specify viewable images, press the <info> button.
    • Select [OK] and press <set>. After a message is displayed, the [Wi-Fi on] screen will appear
    • When a Wi-Fi connection error occurs, you can check the details of the error.
    • To switch to the menu, press the <Menu> button.
    • The main window of Camera Connect will be displayed on the smartphone. The Wi-Fi connection to a smartphone is now complete.

    Canon Eos 800D Sending Images from the Camera to a Smartphone

    By touching an NFC-compatible smartphone to the camera 800D while playing back an image on the camera, you can establish a Wi-Fi connection automatically and send the image to the smartphone even if a Bluetooth or Wi-Fi connection has not been established beforehand.
    • On the [Wi-Fi settings] screen, set [Wi-Fi] to [Enable] and set [NFC connection] to [Enable] in advance .
    • For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna position, refer to the smartphone’s instruction this web.
    1. Play back the image.
    • Press the <Play> button to play backim ages.
    2. Touch a smartphone to the camera.
    • Touch the N mark on the smartphone to that on the camera so that they come into contact with each other.
    • When a message indicating the established connection is displayed on the camera’s LCD monitor, move the smartphone away.
    3. Select the images to send.
    • Select and send image(s).
    • When the index display is selected in step 1, the multiple image selection screen will appear.
    • When the transfer is complete, the screen for step 3 will reappear.
    4. End the image transfer.
    1. Press the <Menu> button on the image transfer screen.
    2. Select [OK] on the screen on the left, then press <set> to end the image transfer and terminate the Wi-Fi connection.
    3. If necessary, also read NFC Function Cautions
    4. During the image transfer operation, a picture cannot be taken even if the camera’s shutter button is pressed.
    5. Images cannot be sent using the NFC function while the camera is connected to another device via Wi-Fi. In addition, the camera cannot be connected to multiple smartphones via Wi-Fi at the same time.
    6. Even if MOV-format movies are displayed in the list, they cannot besaved to a smartphone.
    7. You can cancel the image transfer by selecting [Cancel] during the transfer.
    8. You can select up to 999 files at a time.
    9. With a Wi-Fi connection established, disabling the smartphone’s power saving function is recommended.
    10. When using the NFC function while playing back an image, device registration will not be performed.
    11. When you reduce the image size, all images to be sent at the same time are resized. Note that movies and b size still photos are not reduced.
    12. When you use a battery to power the camera, make sure it is fully charged.
    13. With a Wi-Fi connection established, the camera’s auto power off does not function
    Advertismen

    0 komentar:

    Post a Comment