Showing posts with label Canon EOS 5D Mark IV. Show all posts
Showing posts with label Canon EOS 5D Mark IV. Show all posts

Canon Eos 5D Mark IV Sensor Issue

Do You Have Canon Eos 5D Mark IV ? 
The issue was initially found by Michael Andrew. He saw kind of ghosting ancient rarities over the casing while doing some dynamic range tests. You can see the ancient rarity in the picture above. It is a level banding going over the whole edge

Initially let me say, I have no clue what number of or what rate of Canon 5D4's this effects. It might be 2% it perhaps be 20% or significantly more. On the off chance that you shoot for the most part in JPEG and don't forcefully alter, you may not see it.

Canon Eos 5D Mark IV Sensor Issue

Canon Eos 5D Mark IV Sensor Issue

Here is the manner by which you do the test:

1. Utilize your hand or a bit of cardboard to over-uncover in the left 1/3 part of the casing shooting RAW

2. Bring the document into Camera RAW

3. Knock up the introduction at least +1 (this makes it less demanding to see)

4. Raise shadows. It will resemble the pictures beneath on the off chance that you have it:




Do you have the sensor banding issue on your Canon EOS 5D Mark IV?

Bizarre banding issues on the EOS 5D Mark IV experienced by a few clients.

It appears to be a few clients are encountering a bizarre sensor issue with their Canon EOS 5D Mark IV.

Canon Eos 5D Mark IV Sensor Issue

Canon Eos 5D Mark IV Sensor Issue
He found the accompanying:

The deformity doesn't occur on a 5D3, A7rii, Nikon D500 or Fuji XT-2 under similar conditions.

It just happens on the precise far left 1/3 of the edge when over-uncovering a specific measure of it, around 1/4-1/3 of the casing, and it regularly needs to begin on the exact far left side, and augment least around 1/4 into the edge. Overexposing in the inside, the privilege, or littler bits of the left side have no impact and appear to be ordinary.
Canon Eos 5D Mark IV Sensor Issue


The deformity is entirely flat, notwithstanding when the over presentation is arranged askew.

The imperfection is not noticeable until raising the shadows. You won't see it until then.

Until further notice it is indistinct what number of Canon EOS 5D Mark IV models are influenced by this issue. On the off chance that you need to check yours, continue as takes after:

Utilize your hand or a bit of cardboard to over-uncover in the left 1/3 part of the edge shooting RAW

Bring the record into Camera RAW

Knock up the presentation at least +1 (this makes it simpler to see)

Raise shadows. It will resemble the pictures underneath on the off chance that you have it:

The video beneath acquaints you with the issue and how to test for the thing. More data and photos of the wonder can be found on Michael's site.


Canon EOS 5D Mark IV Setting Noise Reduction

The Canon Eos 5D Mark IV High ISO clamor is the spotted, grainy look you can see at high amplifications in an advanced picture record. The higher your camera's ISO is set, the more probable you are to experience this. Computerized commotion has a tendency to be most obvious in mid-tone to darker zones of a scene, particularly on the off chance that they're somewhat plain and don't have a considerable measure of subtle element or surface.

When you look carefully, you'll see that high ISO computerized pictures really can demonstrate two unmistakable essential sorts of advanced clamor:

As noted somewhere else in this survey, the Canon 5D Mark IV conveys an observable development in high-ISO picture quality over the 1D Mark III. Its four clamor diminishment settings likewise permit you a considerable amount of adaptability in picking how you need to make the exchange off between subject detail and commotion levels. The mix of shooting with NR killed and utilizing a decent clamor separating program sometime later can create clean pictures with bunches of fine detail in them. (What's more, obviously, the 5D Mark IV CR2 records have no high ISO clamor decrease preparing connected to them by any means, sticking to the genuine rationality of RAW shooting.)

Canon EOS 5D Mark IV Setting Noise Reduction

Canon EOS 5D Mark IV Setting Noise Reduction

The Canon EOS 5D Mark IV Setting Noise Reduction, this function reduces the noise generated in the image. Although noise reduction is applied at all ISO speeds, it is particularly effective at high ISO speeds. When shooting at low ISO speeds, the noise in the darker parts of the image (shadow areas) can further be reduced.

1.Select [High ISO speed NR]. Under the tab, select [High ISO speed NR], then press <set>.
2 Set the level.
  • Select the desired noise reduction level, then press <set>.
  • Multi Shot Noise Reduction
  • This applies noise reduction with higher image quality than [High]. For a single photo, four shots are taken continuously and aligned and merged automatically into a single JPEG image. If the image-recording quality is set to RAW or RAW+JPEG, you cannot set [Multi Shot Noise Reduction].
3 Take the picture.
The image will be recorded with noise reduction applied.

Canon EOS 5D Mark IV Setting Multi Shot Noise Reduction

  • If there is significant misalignment in the image due to camera shake, the noise reduction effect may become smaller.
  • If you are hand holding the camera, keep it steady to prevent camera shake. Using a tripod is recommended.
  • If you shoot a moving subject, the moving subject may leave afterimages.
  • The image alignment may not function properly with repetitive patterns (lattice, stripes, etc.) or flat, single-tone images.
  • If the subject’s brightness changes as the four consecutive shots are taken, irregular exposure in the image may result.
  • After shooting, it may take some time to record an image to the card after performing noise reduction and merging the images. During the processing of the images, “buSY” will be displayed in the viewfinder and on the LCD panel, and you cannot take another picture until the processing is completed.
  • You cannot use AEB and WB bracketing.
  • If [Long exp. noise reduction], [Multiple exposure], [HDR Mode], Dual Pixel RAW shooting, AEB shooting, WB bracketing, or Live View shooting with Servo AF is set, [Multi Shot Noise Reduction] cannot be set.
  • This cannot be set for bulb shooting.
  • Flash shooting is not possible. Note that the AF-assist beam of EOS dedicated, external Speedlites will be emitted according to the [AF-assist beam firing] setting.
  • Doing any of the following will automatically switch the setting to [Standard]: Setting the power switch to <off>, replacing the battery, replacing the card, selecting the <A> or <B> shooting mode, setting or switching the image-recording quality to RAW or RAW+JPEG, or switching to movie shooting.
Canon EOS 5D Mark IV Setting Noise Reduction

Canon EOS 5D Mark IV Long Exposure Noise Reduction

For images exposed for 1 sec. or longer, noise (dots of light and banding) typical of long exposures can be reduced.
1 Select [Long exp. noise reduction].
  • Under the camera tab, select [Long exp. noise reduction], then press <0>.
2 Set the desired setting.
  • Select the desired setting, then press <set>.
  • Auto.  For exposures of 1 sec. or longer, noise reduction is performed automatically if noise typical of long exposures is detected. This [Auto] setting is effective in most cases.
  • Enable. Noise reduction is performed for all exposures of 1 sec. or longer. The [Enable] setting may reduce noise that cannot be detected with the [Auto] setting.
3 Take the picture.
  • The image will be recorded with noise reduction applied.
  • With [Auto] or [Enable] set, the noise reduction process after the picture is taken may take the same amount of time as that for the exposure. During noise reduction, shooting is still possible as long as the maximum burst indicator in the viewfinder shows “1” or higher.
  • Images taken at high ISO speeds may look grainier with the [Enable] setting than with the [Disable] or [Auto] setting.
  • With [Enable] set, if a long exposure is shot with the Live View image displayed, “BUSY” will be displayed during the noise reduction process. The Live View display will not appear until the noise reduction is completed. (You cannot take another picture.)

Canon EOS 5D Mark IV Manual Focus

The Canon 5D mark iv dates to 2016 f0r stills, and to 2008 and the 5D Mk II for video. With the Mark IV, video is knock to DCI 4K (4096 x 2160 pixels) at 24 or 30 outlines for every second for up to 30 minutes for each clasp. There's additionally Full HD video (1920 x 1080) at up to 60 fps, or HD (720p or 1280 x 720) at up to 120 fps for quarter-speed moderate movement. The drawback to shooting 4K on the Mark IV is that Canon took the 6720 x 4480 sensor and simply utilize the middle 4096 x 2160 pixels. That flawlessly comprehends the issue of down sampling on the fly with potential quality issues, yet it likewise implies a harvest component of 1.74x. Pick the new 24-105mm Canon L Series focal point, regularly considered the ideal ordinary focal point, to shoot video and the compelling central length bounced to 42-165mm. What was a moderate wide-point to direct fax turns into an ordinary to-zooming focal point

Canon EOS 5D Mark IV Manual Focus

Canon EOS 5D Mark IV Manual Focus 

Selecting the AF Operation

For the Canon EOS 5D mark iv manual focus better than eos mark iii or eos 5d mark ii. You can select the AF operation characteristics to suit the shooting conditions or subject. In the <A> mode, [One Shot AF] is set automatically.
  1. Press the <Drive+AF> button.
  2. Select the AF operation. Turn the dial to select the desired AF operation, then press<set>.

One-Shot AF for Still Subjects

Suited for still subjects. When you press the shutter button halfway, the camera will focus only once.
  • When focus is achieved, the AF point will turn green.
  • The focus remains locked while you hold down the shutter button halfway, allowing you to recompose the image before taking the picture.
One-Shot AF for Still Subjects
  • Settable only for Live View shooting (not settable for movie shooting).
  • If focus cannot be achieved, the AF point will turn orange. If this occurs, the picture cannot be taken even if the shutter button is pressed completely. Recompose the shot and try to focus again. Or, see “Shooting Conditions that Make Focusing Difficult” .

Servo AF for Moving Subjects

From the EOS 5D mark iv  manual this AF operation is suited for moving subjects. While you hold down the shutter button halfway, the Canon camera will keep focusing on the subject continuously.
  • When the drive mode is set to  for high-speed continuous shooting, the maximum continuous shooting speed will be approx. 4.3 shots/sec. The pictures will be taken with priority given to the continuous shooting speed. With the low-speed continuous shooting setting, “Subject-tracking priority” will be used for shooting.
  • Canon eos mark iv For flash photography, the continuous shooting speed will become slower.
  • When focus is achieved, the AF point will turn blue.
  • The exposure is set at the moment the picture is taken.
  • When [AF method] is set to [u+Tracking] or [Flexizone - Multi], focusing will be continuous as long as the area frame can track the subject.
  • Servo AF for Moving Subjects
  • Depending on the lens used, the distance to the subject, and the subject’s speed, the camera may not be able to achieve correct focus.
  • Zooming during continuous shooting may throw off the focus. Zoom first, then recompose and shoot.
  • When [Servo AF] is set, the image-recording quality cannot be set to 41 or 61. If 41 or 61 is set, the image will be recorded in quality.
  • When [Servo AF] is set and [Multi Shot Noise Reduction] is set, [High ISO speed NR] will automatically switch to [Standard].
  • If [Servo AF] is set, pressing the button assigned for the function will not take effect if you set 41 or 61 image-quality for the [One-touch image quality setting] or [One-touch image quality (hold)] with [Custom Controls].
  • With Servo AF, the beeper will not sound even when focus is achieved
Canon EOS 5D Mark IV Manual Focus

Canon EOS 5D Mark IV Focusing with AF (AF Method)

You can set the EOS 5D AF method to suit the shooting conditions and subject.
If you want to achieve precise focus, set the lens’s focus mode switch to <MF>, magnify the image, and focus manually.
Select the AF method.
  • Under the [z5] tab (the [z3] tab in <A> mode), select [AF method].
  • Select the desired AF method, then press <set>.
  • When the Live View image is displayed, you can press the <drive+AF> button to select the AFoperation.
The camera detects and focuses on human faces. If a face moves, the AF point <p> also moves to track the face.
1 Display the Live View image.
  • Press the <0> button.
  • The Live View image will appear on the LCD monitor.
2 Select an AF point.
  • When a face is detected, the area frame will be displayed and <p> will appear over the face to be focused on.
  • If multiple faces are detected, <q> will be displayed. Use <9> to move <q> over the face you want to focus on.
  • You can also tap on the LCD monitor screen to select the face or subject. If you tap on a subject other than a human face, the AF point will be switched to < >.
3 Focus on the subject.
  • Press the shutter button halfway to focus.
  • If no faces can be detected or if you do not tap anything on the screen, the camera will switch to FlexiZone - Multi.
  • When focus is achieved, the AF point will turn green and the beeper will sound.
  • If focus is not achieved, the AF point will turn orange.
4 Take the picture.
Check the canon mark iv focus and exposure, then press the shutter button completely to take the picture.
Focusing on a subject other than a human face
  • Tap on the subject (or spot) where you want to focus.
  • Press <set> and the AF point will appear on the screen. Then use to move the AF point over the target subject.
  • Once the AF point achieves focus, it will track the subject even if the subject moves or if you change the composition
You can use up to 63 AF points for wide-area focusing (automatic selection). This wide area can also be divided into 9 zones for focusing (zone selection).
1 Display the Live View image.
  • Press the <set> button.
  • The Live View image will appear on the LCD monitor.
2 Select the AF point.N
  • Pressing <set> will toggle between automatic selection and zone selection. In the <A> mode, automatic selection is set automatically.
  • Use to select the zone. To return to the center zone, press <set> again.
  • You can also tap on the LCD monitor screen to select a zone. When a zone is selected, tap on the screen to switch to automatic selection.
3 Focus on the subject.
  • Aim the AF point over the subject and press the shutter button halfway.
  • When focus is achieved, the AF point will turn green and the beeper will sound.
  • If focus is not achieved, the area frame will turn orange.
4 Take the picture.
  • Check the focus and exposure, then press the shutter button completely to take the picture.

 Flexy Zone Multy

The camera focuses with a single AF point. This is effective when you want to focus on a particular subject.

1Display the Live View image.
  • Press the <set> button.
  • The Live View image will appear on the LCD monitor.
  • The AF point will appear.
  • If [Movie servo AF] is set to [Enable], the AF point will be displayed larger.
2 Move the AF point.
  • Use to move the AF point to where you want to focus. (It cannot be moved to the edge of the screen.)
  • Using <set> will return the AF point to the screen center.
  • You can also tap on the LCD monitor screen to move the AF point.
3 Focus on the subject.
  • Aim the AF point over the subject and press the shutter button halfway.
  • When focus is achieved, the AF point will turn green and the beeper will sound.
  • If focus is not achieved, the AF point will turn orange.
4 Take the picture.
Check the focus and exposure, then press the shutter button completely to take the picture

AF Operation
  1. Even when focus is achieved, pressing the shutter button halfway will focus again.
  2. The image brightness may change during and after the AF operation.
  3. Depending on the subject and shooting conditions, it may take longer to focus or the continuous shooting speed may decrease.
  4. If the light source changes while the Live View image is displayed, the screen may flicker and focusing may be difficult. If this happens, exit Live View shooting and perform AF under the actual light source under which you are shooting. Shooting Conditions that Make Focusing Difficult
  5. Subject with low-contrast such as the blue sky, solid-color flat surfaces or when highlight or shadow details are clipped.
  6. Subjects in low light.
  7. Stripes and other patterns where there is contrast only in the horizontal direction.
  8. Subjects with repetitive patterns (Example: Skyscraper windows, computer keyboards, etc.).
  9. Fine lines and subject outlines.
  10. Under a light source whose brightness, color, or pattern keeps changing.
  11. Night scenes or points of light.
  12. The image flickers under fluorescent or LED lighting.
  13. Extremely small subjects.
  14. Subjects at the edge of the picture.
  15. Strongly backlit or reflective subjects (Example: Car with a highly reflective body, etc.).
  16. Near and distant subjects covered by an AF point (Example: Animal in a cage, etc.).
  17. Subjects that keep moving within the AF point and will not stay stilldue to camera shake or subject blur.
  18. Performing AF when the subject is very far out of focus.
  19. Soft focus effect is applied with a soft focus lens.
  20. A special effect filter is used.
  21. Noise (dots of light, banding, etc.) appears on the screen during AF.

Canon EOS 5D Mark IV FlexiZone Multi

In the [FlexiZone - Multi] and [FlexiZone - Single] modes, either press the <u> button or tap on displayed on the bottom right of the screen. You can magnify the image by approx. 5x or 10x and check the focus.
Magnified view is not possible with [u+Tracking].
  • To move the AF point or select a zone, operate or tap on the spot you want to magnify.
  • Either press the button to magnify the image. Each time you press the button or tap on, the magnification ratio changes.
  • When [FlexiZone - Multi] is set, the image will be magnified at the center of the zone frame (or image center with automatic selection). When [FlexiZone - Single] is set, the image will be magnified at the AF point.
  • At 100% (approx. 1x) magnification, operate or tap on the screen to move the magnifying frame. Pressing <set> will return the magnifying frame to the screen center.
  • Either press the button or tap on to magnify the area covered by the magnifying frame.
  • When the image is magnified by approx. 5x or 10x, you can change the magnified area by operating or tapping on the triangle on the screen top, bottom, left, or right.
  • When you press the shutter button halfway, the normal view will return for [FlexiZone - Multi]. For [FlexiZone - Single], AF will proceed with the magnified view.
  • With Servo AF and magnified view, pressing the shutter button halfway will return to the normal view for focusing.

Canon EOS 5D Mark IV Shooting with the Touch Shutter

Just by tapping on the LCD monitor screen, you can focus and take the picture automatically.
1 Display the Live View image.
  • Press the <set> button.
  • The Live View image will appear on the LCD monitor.
2 Enable the touch shutter.
  • Tap [y] on the screen’s bottom left. Each time you tap on the icon, it will toggle between.
  • (Touch shutter: Enable) The camera will focus on the spot you tap on, then the picture will be taken.
  • (Touch shutter: Disable)
  • You can tap on a spot to perform focusing on the spot. Press the shutter button completely to take the picture.
3 Tap on the screen to shoot.
  • Tap on the face or subject on the screen.
  • On the point you tap, the camera will focus (Touch AF) with the AF method that was set.
  • When  is set, the AF point turns green when focus is achieved, then the picture is taken automatically.
  • If focus is not achieved, the AF point turns orange and the picture cannot be taken. Tap on the face or subject on the screen again.

Canon EOS 5D Mark IV MF: Focusing Manually

You can magnify the image and focus precisely with MF (manual focus).
1 Set the lens’s focus mode switch to <MF>.
  • Turn the lens focusing ring to focus roughly.
2 Display the magnifying frame.
  • Press the <u> button or tap on the lower right of the screen.
  • The magnifying frame will appear.
3 Move the magnifying frame.
  • Either operate <set> or tap on the spot you want to magnify to move the magnifying frame to where you want to focus.
  • Pressing <set> will return the magnifying frame to the screen center.
4 Magnify the image.
  • Each time you press the button on the lower right of the screen, the display will change in the following sequence:
  • While in magnified view, you can operate tap on the triangle displayed on the top, bottom, left, or right of the screen to scroll around the magnified image.
5 Focus manually.
  • While looking at the magnified image, turn the lens focusing ring to focus.
  • After achieving focus, press the button to return to the normal view.
6 Take the picture.
  • Check the exposure, then press the shutter button completely to take the picture

Canon Eos 5D Mark IV Setting Dual Pixel Raw Function

Setting the EOS 5D Mark IV to record the new Dual Pixel RAW documents is just about as simple: pre-set the canon eos 5d camera to shoot full-determination RAW pictures (the element isn't accessible on the off chance that you set decreased determination RAW), and after that in the following thing in the principal shooting menu, set the Dual Pixel RAW choice to "Empower." That's it! (At whatever time this choice is set to "Handicap" it's industrial facility default setting  you're back to shooting routine RAW picture records.)

What's more that, as well as the Dual Pixel CMOS AF tech is additionally being utilized as a part of a completely new (and we need to say, extremely shrewd) route in the 5D IV, civility of what Canon is calling Dual Pixel RAW.

On the off chance that you shoot RAW pictures (other than 41 or 61) when Dual Pixel RAW function is set, they will be recorded as "unique RAW pictures (Dual Pixel RAW pictures)" with Dual Pixel information from the picture sensor affixed. This is called Dual Pixel RAW shooting. When you perform handling of the Dual Pixel RAW picture with the

Eos 5D Mark IV Setting Dual Pixel Raw

Canon Eos 5D Mark IV Setting Dual Pixel Raw Function

Eos 5D Mark IV Advanced Photo Professional (EOS programming), you can make utilization of the Dual Pixel information recorded with the Dual Pixel RAW picture for small scale modification of the position of most extreme sharpness and determination utilizing the profundity data contained inside the document, repositioning the perspective or closer view bokeh for an all the more satisfying result, and lessening the presence of ghosting in pictures.

Since the impact will contrast contingent upon the shooting conditions, allude to the Digital Photo Professional Instruction Manual for the components of Duel Pixel RAW function and Dual Pixel RAW picture preparing before performing Dual Pixel Raw shooting.
  1. Select [Dual Pixel RAW]. Under the [z1] tab, select [Dual Pixel RAW], then press <set>.
  2. Select [Enable]. Press the <info> button and read the Help screen  before proceeding. Select [Enable], then press <set>.
  3. Set the image-recording quality to RAW, then set the image recording quality to RAW or RAW+JPEG. <DPR> will be displayed on the LCD panel.
  4. Take the picture. A RAW image appended with Dual Pixel data (Dual Pixel RAW image) will be recorded.
  • Even if  Dual Pixel RAW] is set to [Enable], you cannot record 41 or 61 images appended with the Dual Pixel data (only possible with RAW images).
  • If Record func+card/folder sel. is set to [Rec. separately] and the image-recording quality is set to RAW for one card and 41 or 61 for the other, Dual Pixel RAW shooting cannot be performed.
  • When Dual Pixel RAW] is set to [Enable], you cannot use multiple exposures, HDR shooting, the One-touch image quality setting or Digital Lens Optimizer. Also, the startup time will be longer when the power switch is set to <RAW> or to resume from the Auto power off state.
  • With Dual Pixel RAW shooting, the number of possible shots will decrease.
  • Shooting in Dual Pixel RAW using the viewfinder will decrease the continuous shooting speed. The maximum burst for continuous shooting will also decrease.
  • When you shoot RAW or RAW+JPEG images with [Dual Pixel RAW] set to [Enable], noise may be more noticeable compared with that in normal shooting. 

Adjustment Amount and Correction Effect of the Dual Pixel RAW Function

  • The adjustment amount and correction effect will increase with a larger aperture.
  • The sufficient adjustment amount and correction effect may not be obtained depending on the lens and scene.
  • The adjustment amount and correction effect will vary depending on the camera orientation (vertical or horizontal).
  • The sufficient adjustment amount and correction effect may not be obtained depending on the shooting conditions. <DPR> can be displayed in the viewfinder for Dual Pixel RAW shooting
Canon Eos 5D Mark IV Setting Dual Pixel Raw Function, It's such a fascinating and energizing new element that we've given a whole area of this audit to it, which you can read here. More or less, however, what it permits is for minor post-catch acclimations to self-adjust, bokeh and ghosting. You can likewise join changes in accordance with each of the three, on the off chance that you like.

Canon EOS 5D Mark IV Setup Connectivity To Smartphones

The camera likewise turns into the first in the EOS 5D arrangement to include worked in Wi-Fi and Near-Field Communication (NFC) for the simple exchange of pictures and MP4 films to perfect cell phones, too remote shooting when utilizing the Canon Camera Connect App. It likewise incorporates an inherent GPS recipient with compass for exact geo-labeled data of scope, longitude, and rise.

Canon EOS 5D Mark IV Setup Connection To Smartphones

Canon EOS 5D Mark IV Setup Connection

Canon EOS 5D Mark IV Setup Connectivity To Smartphones, iphone, ipad, samsung note 7 etc.Communicating with a smartphone enables you to perform the following:
  • View images stored in the camera on a smartphone or save viewed images to a smartphone.
  • Operate the camera to take a picture or change camera settings using a smartphone.
  • Send images to a smartphone from the camera.
This section explains how to connect the camera directly to a smartphone via Wi-Fi.
  1. Install Camera Connect on the smartphone before setting up a connection .
  2. For procedures to send images to an NFC-enabled smartphone,
Connecting Metode
  • When the smartphone is NFC-enabled:You can easily set up a connection using the NFC function.
  • When the smartphone is not NFC-enable
Set up a connection by selecting Easy connection.
Smartphones labeled with the P mark are NFC-enabled. Some smartphones are not labeled with the P mark even if they are NFC enabled; if you do not know whether your smartphone is NFC-enabled, contact the manufacturer of the smartphone.

Canon EOS 5D Mark IV Connecting to an NFC enabled Smartphone

NFC-enabled smartphones can be connected by touching them to the camera. The operation flow is as follows.
  1. Turn on the camera and smartphone.
  2. Enable the NFC function on the camera and smartphone.
  3. Touch the smartphone to the camera so that they come into contact with each other.

Canon EOS 5D Mark IV camera’s NFC setting,

For the smartphone’s Wi-Fi setting, NFC setting, and NFC antenna position, refer to the smartphone’s instruction canon markiv manual.
1.Enable the NFC function on the camera and smartphone
2.Touch a smartphone to the camera.
  • If the download site of Camera Connect appears on the smartphone, install Camera Connect.
  • If an image is being played back on the camera, press the <3> button to end the playback.
  • Touch the P mark on the smartphone to that on the camera.
  • When a message indicating the connection is being established is displayed on the camera’s LCD monitor, move the smartphone away from the camera.
  • Camera Connect starts on the smartphone and establishes a connection.
3. Connect to the camera.
  1. When a connection is established, the screen on the left will appear on the camera’s LCD monitor. When connecting to the same smartphone, this screen will not appear again.
  2. To specify viewable images, press the <B> button.
  3. Select [OK] and press <set>. After a message is displayed, the [Wi-Fi on] screen will appear.
  4. The main window of Camera Connect will be displayed on the smartphone.
  5. To return to the menu, press the<M> button.
  1. If necessary, also read “NFC Function Cautions”
  2. When touching the smartphone to the camera, be careful not to drop the camera or smartphone.
  3. Do not touch the smartphone to the camera with too much force. Doing so can scratch the camera or smartphone.
  4. Just holding the smartphone close to the mark may not establish a connection. Be sure to touch the mark with the smartphone so that they come into contact with each other.
  5. Recognition may be difficult depending on the smartphone. Touch slowly while changing the position or rotating horizontally.
  6. Another application on the smartphone may start depending on how you touch. Check the position of the P mark, then touch again.
  7. When touching the smartphone to the camera, do not leave anything between the camera and smartphone. In addition, when a case is attached to the camera or smartphone, communication may not be possible via NFC function.
  8. The camera cannot be connected to two or more smartphones at the same time.
  9. By default, the connection settings with the NFC function are saved as the fourth setting (a setting dedicated to NFC connection) under the name [SET4(NFC)]. When you connect the camera to another smartphone via NFC, [SET4(NFC)] will be overwritten.
  10. While connected, the camera’s auto power off does not function.


Canon EOS 5D Mark IV Connecting with Easy Connection

The camera EOS 5D mark iv and a smartphone can be directly connected via Wi-Fi. To establish connection, operations on the smartphone are required. For details, refer to the smartphone’s instruction manual.
  1. Install Camera Canon 5D mark 4 Connect on the smartphone
  2. Select [Communication settings]. Under the [4] tab, select [Communication settings], then press <set>.
  3. Select [Built-in wireless settings].
  4. Select (Wi-Fi function). Set [Wi-Fi/NFC] to [Enable], then select [Wi-Fi function] If a screen for setting a nickname (for identification) appears, register a nickname .
  5. Select q (Connect to smartphone). Select [Easy connection].
  6. Select [OK] and press <set> to go to the next screen.
  7. Operate the smartphone and connect it to the camera. Activate the smartphone’s Wi-Fi function, then select the SSID (network name) displayed on the camera’s LCD monitor. For the password, enter the encryption key displayed on the camera’s LCD monitor.
  8. Start Camera Connect on the smartphone. When the [Waiting to connect] screen is displayed on the camera’s LCD monitor, start Camera Connect on the smartphone.
  9. Select the camera to connect to on the smartphone. Select and tap the camera to connect to from [Cameras] on Camera Connect.

Canon EOS 5D Mark IV GPS Setting

This part clarifies the camera's inherent GPS settings. The EOS 5D Mark IV (WG) can get satellite route signals from GPS satellites (USA), GLONASS satellites (Russia), and Quasi-Zenith Satellite System (QZSS) "Michibiki" (Japan).
  1. The GPS capacity is set to [Disable] as a matter of course.
  2. This manual uses the expression "GPS" to allude to the satellite route capacity.
At the point when [GPS] is set to [Mode 1], the camera will keep on receiving GPS signals at customary interims indeed, even after the canon camera's mark iv energy switch is set to <2>. The battery will along these lines deplete speedier and the quantity of conceivable shots will diminish. On the off chance that you won't utilize GPS, setting [GPS] to [Disable] or [Mode 2] is prescribed.

Canon EOS 5D Mark IV GPS Setting
Canon EOS 5D Mark IV GPS Setting Geotagging Images

Geotag information
  • (scope, longitude, height) and facilitated widespread time can be added to pictures.
  • Shooting areas of geotagged pictures can be shown on a guide on a PC
  1. Certain travel conditions or GPS settings may cause inaccurate geotag information to be added to images.
  2. Coordinated Universal Time, abbreviated as UTC, is essentially the same as Greenwich Mean Time.
You can use the GPS logging function to automatically record the route the Camera Mark IV travels by logging location information at set intervals. The location information for the route the camera has traveled can be
viewed on a map displayed on a computer. Certain traveling conditions, locations, or GPS settings may cause inaccurate geotag information to be added to images.

Setting the Camera Time

The GPS information recorded to the images and movies may include information that can personally identify yourself. Therefore, be careful when giving geotagged still photos or movies to other people or displaying them online to the public.

GPS Precautions

Countries and Regions Permitting GPS Function Use.

  • Use of GPS function is restricted in some countries and regions, and illegal use may be punishable under national or local regulations. To avoid violating GPS function regulations, visit the Canon Web site to check where the use is allowed. Note that Canon cannot be held liable for any problems arising from GPS function use in other countries and regions.

Model Number

  • EOS 5D Mark IV (WG) : DS126601 (including GPS module model: ES300) In certain countries and regions, the use of GPS function may be restricted. Therefore, be sure to use GPS function in accordance with the laws and regulations of your country or region. Be particularly careful when using GPS function outside your home country.
  • Be careful about using GPS function where the operation of electronic devices is restricted.
  • Others may be able to locate or identify you by using location data in your geotagged pictures or movies. Be careful when sharing these geotagged images, movies or GPS log files with others, such as when posting them online where many people can view them.
  • GPS signal reception may take a longer time in some cases.
ls, take the camera outside where the sky is unobstructed. Face the top of the camera toward the sky while keeping your hands, etc. away from the camera top.

Canon EOS 5D Mark IV Acquiring GPS Signals

When the signal acquisition conditions are good, it will take the camera approx. 30 sec. to 60 sec. to acquire the GPS satellite signals after you set [GPS] to [Mode 1] or [Mode 2]. Check that [r] is displayed on the LCD panel, then shoot.
  1. Select [GPS settings]. Under the [54] tab, select [GPS settings], then press <set>.
  2. Select the mode. Select [Mode 1] or [Mode 2]. [r] will be displayed on the LCD panel.

Mode 1

Canon EOS 5D Mark IV GPS SettingThe camera will continue to receive GPS signals at regular intervals even when the power switch is set to <1> or <2>.

Mode 2

When the power switch is set to <1>, the camera will receive GPS signals. When the power switch is set to <2>, the GPS function will also turn off. However, if auto power off is in effect, the camera will continue to receive GPS signals at regular intervals. Acquiring GPS Signals

Canon EOS 5D Mark IV GPS Acquisition Status

The GPS acquisition status is indicated by the [GPS] icon displayed on the camera’s LCD panel.
Constant GPS: Signal acquired
Blinking GPS: Signal not acquired yet
When you shoot while [GPS] is constantly displayed, the image will be geotagged.

Canon EOS 5D Mark IV Poor GPS Coverage

Under the following conditions, the EOS 5D Mark IV GPS satellite signal will not be properly acquired. As a result, the geotag information may not be recorded or inaccurate geotag information may be recorded.
Indoors, underground, in tunnels or forests, between buildings, or in valleys.
  • Near high-voltage power lines or mobile phones operating on the 1.5 GHz band.
  • When the camera is left inside a bag, etc.
  • When traveling a long distance.
  • When traveling through different environments.
  • Since GPS satellites move as time passes, satellite movement can interfere with geotagging and cause missing or inaccurate location information even in conditions other than the above.
  • Additionally, the location information may also include a different location information with the route traveled even if the camera was used at just one location.
  • The battery level may be low when you start using the camera due to the effect of the GPS function. If necessary, recharge the battery or prepare a charged, spare battery (sold separately).
  • The camera can receive GPS signals even when shooting in the vertical orientation.

Viewing GPS Information

1 Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2].
2 Select [GPS information display]. The GPS information will be displayed.
3 Take the picture.
When you shoot after GPS signal acquisition, the image will be geotagged

Canon EOS 5D Mark IV GPS Setting
Setting the Positioning Interval

The interval (time) to update the geotag information can be set. Although updating the geotag information at shorter intervals will record more accurate location information, it will reduce the number of possible shots because it will drain the battery faster.
  1. Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2].
  2. Select [Position update intvl.
  3. Set the desired update interval. Select the desired update interval, then press <0>.
The time information obtained from GPS signals can be set on the camera. The margin of error is approx. ±1 sec.
  • Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2].
  • Select [Auto time setting].
  • Select the desired setting.
  • Select [Auto update] or [Set now], then press <0>. [Auto update] updates the time when the camera is turned on and a GPS signal is received.

Canon EOS 5D Mark IV Logging the Route Traveled

When using the Canon EOS 5D Mark IV GPS logging function,
the geotag information of the route the camera travels is automatically recorded in the camera’s internal memory. With Map Utility (EOS software), you can view the shooting locations and the route traveled on a map displayed on a computer.
  1. Check the [GPS] setting. Check that [GPS] is set to [Mode 1] or [Mode 2].
  2. Select [GPS Logger].
  3. Set [Log GPS position] to [Enable].
  • Select (Log GPS position), then press <set>.
  • Select (Enable), then press <set>.
  • (LOG) will be displayed on the LCD panel.

How To Setting the ISO Speed Canon EOS 5D Mark IV

In spite of the noteworthy increment in sensor determination, the Canon 5D IV still has the same general affectability range as its ancestor. Also, amazingly, a more noteworthy extent of that reach is accessible as a matter of course, without the need to empower ISO affectability development.

As a matter of course, a scope of ISO 100 to 32,000-reciprocals is accessible, which implies you can wander somewhat higher than the ISO 25,600 default limit for the 5D III. Empower ISO extensions, and the full affectability scope of ISO 50 to 102,400-counterparts will be accessible.

Setting ISO Speed Canon EOS 5D Mark IV Setting the ISO Speed Canon EOS 5D Mark IV

Set the ISO speed (image sensor’s sensitivity to light) to suit the ambient light level. In the <A> mode, the ISO speed is automatically set
Regarding the ISO speed during movie shooting
    Setting ISO Speed Canon EOS 5D Mark IV
  1. Press the <iso> button <6> .
  2. Set the ISO speed.
  • While looking at the LCD panel or in the viewfinder, turn the <6> dial.
  • ISO speed can be set within ISO 100 - ISO 32000 in 1/3-stop increments.
  • “A” indicates ISO Auto. The ISO speed will be set automatically
ISO Speed Guide
ISO Speed Shooting Situation Flash Range

(No flash)
L (50), ISO 100 - ISO 400 Sunny outdoors
ISO 400 - ISO 1600 Overcast skies or The higher the ISO speed,
ISO 1600 - ISO 32000, evening time the farther the effective
H1 (51200), H2 (102400) Dark indoors or night flash range will be.

  1. As H1 (equivalent to ISO 51200) and H2 (equivalent to ISO 102400) are expanded ISO speed settings, noise (dots of light, banding, etc.) and irregular colors will be more noticeable, and the resolution lower compared with the standard setting.
  2. As L (equivalent to ISO 50) is an expanded ISO speed setting, the dynamic range will be somewhat narrower compared with the standard setting.
  3. If (Highlight tone priority) is set to [Enable] (p.206), L (equivalent to ISO 50), ISO 100/125/160, H1 (equivalent to ISO 51200), and H2 (equivalent to ISO 102400) cannot be selected.
  4. When shooting with a high ISO speed, high temperature, long exposure, or multiple exposure, image noise (rough grain, dots of light, banding, etc.) and irregular colors may become noticeable.
  5. When shooting in conditions that produce an extreme amount of noise, such as a combination of high ISO speed, high temperature, and long exposure, images may not be recorded properly.
  6. If you use a high ISO speed and flash to shoot a close subject, overexposure may result.
Under [ISO speed settings], you can use [Range for stills] to expand the settable ISO speed range from L (equivalent to ISO 50) to H1 (equivalent to ISO 51200) and H2 (equivalent to ISO 102400)

Canon EOS 5D Mark IV Setting ISO Auto

If the ISO speed is set to “A” (Auto), the actual ISO speed to be set will be displayed when you press the shutter button halfway. As indicated below, the ISO speed will be set automatically to suit the shooting
mode.
  1. The actual ISO speed range depends on the [Minimum] and [Maximum] settings set in [Auto range].
  2. If fill-in flash will cause overexposure, ISO 100 or a higher ISO will be set. (Except in the <M> and <B> modes.)
  3. In the <P> mode, if you use bounce flash with an external Speedlite, ISO 400 - ISO 1600 will be set automatically.

Canon EOS 5D Mark IV Setting Manually-Settable ISO Speed Range

You can your Canon EOS 5D Mark IV setting the manually-settable ISO speed range (minimum and maximum limits).
You can set the minimum limit within L (equivalent to ISO 50) to H1 (equivalent to ISO 51200), and the maximum limit within ISO 100 to H2 (equivalent to ISO 102400).

1 Select [ISO speed settings]. Under the [z2] tab, select [ISO speed settings], then press <set>.
2 Select [Range for stills].
Setting ISO Speed Canon EOS 5D Mark IV3 Set the minimum limit.
  • Select the minimum limit box, then press <set>.
  • Select the ISO speed, then press <set>.
4 Set the maximum limit.
  • Select the maximum limit box, then press <set>.
  • Select the ISO speed, then press<set>.
5 Select [OK].

Setting the ISO Speed Range for ISO Auto

You can set the automatic ISO speed range for ISO Auto within ISO 100 - ISO 32000. You can set the minimum limit within ISO 100 - ISO 25600, and the maximum limit within ISO 200 - ISO 32000 in whole-stop increments.
1 Select [Auto range].
2 Set the minimum limit.
  • Select the minimum limit box, then press <set>.
  • Select the ISO speed, then press <set>.
3 Set the maximum limit.
  • Select the maximum limit box, then press <set>.
  • Select the ISO speed, then press <set>.
4 Select [OK]

Setting ISO Speed Canon EOS 5D Mark IVSetting the Minimum Shutter Speed for ISO Auto

You can your camera EOS 5D mark 4 to setting the minimum shutter speed so that the shutter speed set automatically will not be too slow when ISO Auto is set. This is effective in the <d> and <f> modes when you use a wideangle lens to shoot a moving subject or when you use a telephoto lens. It helps to reduce camera shake and blurred subjects.
1 Select [Min. shutter spd.].
2 Set the desired minimum shutter speed. Select [Auto] or [Manual].
  • If you select [Auto], turn the <6> dial to set the desired speed, slower or faster compared to the standard speed, then press <set>.
  • If you select [Manual], turn the <6> dial to select the shutter speed, then press <set>.
3 Setting the Minimum Shutter Speed for ISO Auto Automatically set

Canon EOS 5D Mark 4 Manually set

If a correct exposure cannot be obtained with the maximum ISO speed limit set with [Auto range], a shutter speed slower than the [Min. shutter spd.] will be set to obtain the standard exposure. This function will not be applied to flash and movie shooting.
When [Auto] is set, the minimum shutter speed will be the reciprocal of the lens focal length. A single step from [Slower] to [Faster] is equivalent to a single shutter speed stop.

Notwithstanding its centering capacities, Canon EOS Mark iv is currently utilizing Dual Pixel into omething many refer to as Dual Pixel Raw, which basically takes into account focal point small scale conformities and revisions to be made sometime later. Ordinance was exceptionally watchful to underline that it doesn't take into account the refocusing of a picture afterward (in the style of the now-old Lytro camera), yet basically to make alterations. This is a component that we'll be plunging into rather profoundly once we have a survey unit.

Canon EOS 5D Mark IV Wireless Setup Connection

Group today reported the 5D Mark IV, the fourth emphasis of the organization's prevalent full-outline DSLR camera initially propelled in 2005. It's the main Canon 5D to shoot 4K video, and it's additionally the initial 5D to accompany Wi-Fi network and a touchscreen. The 5D Mark IV will be accessible toward the beginning of September

Canon EOS 5D Mark IV Wireless Setup

First, set the camera Canon EOS 5D Mark IV nickname (for identification).When the Canon EOS 5D Mark IV Wireless Setup is connected to another device wirelessly, the nickname will be displayed on the device. Be sure to set a nickname as otherwise you cannot set the wireless functions.
  1. Select [Communication settings]. Press the <Menu> button, select [Communication settings] under the tab, and press
  2. Select [Built-in wireless settings].
  3. Select [Nickname]. When this setting is selected for the first time, a screen to register a nickname is displayed. Press <set> and proceed to step 4.
  4. Enter a nickname For instructions on entering characters, see the next page. When using the default nickname (the camera name), proceed to step 5. Otherwise, enter any characters between 1 to 10 characters in length.
  5. Exit the setting. When you are finished, press the <Menu> button. Select [OK] on the confirmation dialog and press <set> to return to the menu screen
The basic operation for using the EOS 5D Mark IV wireless functions is explained here. Follow the procedures below.
  1. Select [Communication settings]. Press the <Menu> button, select [Communication settings] under the tab, and press <set>.
  2. Select [Built-in wireless settings].
  3. Select [Wi-Fi/NFC].
  4. Select [Enable]. When a nickname (for identification) is not registered, a registration screen is displayed.
  5. [Wi-Fi function] is now selec table Select [Wi-Fi function].
  6. Select the Wi-Fi function to connect to. Use <5> or <9> to select an item, then press <set>
  • When the Canon EOS 5D mark iv wireless connection settings are not registered, the setting screen is displayed. When the connection settings are already registered, the reconnection screen is displaye
  • When using the NFC function, The [Built-in wireless settings] screen displayed in step 5 is the portal screen for setting the wireless functions.
  • Select an item and press <set> to display the setting screen, then specify the settings. On the [Built-in wireless settings] screen, you can set the following items:

Canon EOS 5D Mark IV Wi-Fi Function

Set whether to [Enable] or [Disable] the wireless functions. You can also set whether to enable or disable the NFC function.
  1. Set to [Enable] to enable the selection of [Wi-Fi function], [Send images to smartphone], and [Clear settings].
  2. When the use of electronic devices and wireless devices is prohibited, such as on board airplanes or in hospitals, set it to [Disable].
Wi-Fi function
The following Wi-Fi functions are available:
  1. Connect to smartphone
  2. Remote control (EOS Utility)
  3. Print from Wi-Fi printer
  4. Transfer images to FTP server
  5. Upload to Web service [Send images to smartphone]
While the camera is connected to a smartphone, use this function to send images stored in the camera to the smartphone.

Interface Cable Connection Cautions
  1. During a wireless LAN connection, you cannot use the camera by connecting it to Connect Station, a computer, a wireless file transmitter, or another device with a cable. Terminate the connection before connecting a cable.
  2. When the camera is connected to Connect Station, a computer, a wireless file transmitter, or another device with a cable, you cannot select [Built-in wireless settings]. Disconnect the cable before changing any settings.

Canon EOS 5D Mark IV with a Wireless Connection Established

When you want to prioritize the wireless connection, do not operate the power switch, card slot cover, battery compartment cover, or other parts. Otherwise, the wireless connection may be terminated.
Using an Eye-Fi Card
When [Wi-Fi/NFC] is set to [Enable], image transfer using an Eye-Fi card is disabled.

Canon EOS 5D Mark IV Using an NFC

Using an NFC-enabled smartphone or Connect Station enables you to do the following:
  1. Touch a smartphone to the camera to easily connect them wirelessly
  2. While playing back images on the camera, touch a smartphone to the camera to send a captured image to the smartphone
  3. Hold the camera close to Connect Station (sold separately) to easily connect them wirelessly
When using the NFC function, follow the steps below to set the camera’s NFC setting.
  1. Select [Communication settings]. Under the tab, select [Communication settings], then press <set>.
  2. Select [Built-in wireless settings].
  3. Select [Wi-Fi/NFC].
Add to NFC connections].
  1. Displayed when [Wi-Fi/NFC] is set to [Enable].
  2. Press the <info> button to add or remove . Add , then press<set>.
  3. When a nickname (for identification) is not registered, a registration screen is displayed
  4. When establishing wireless communications using the NFC function,
To use (Connect to smartphone), a smartphone on which iOS (iphone) or Android is installed is necessary. In addition, the dedicated application Camera Connect (free of charge) must be installed on the smartphone.
  1. Camera Connect can be downloaded from the App Store or Google Play.
  2. For the operating system versions supported by Camera Connect, refer to the download site of Camera Connect.
  3. When an NFC-enabled smartphone is touched to the camera before installing Camera Connect, the download screen of Camera
  4. Connect will be displayed on the smartphone.
  5. Interface or functions of the camera and Camera Connect are subject to change for firmware update of the camera or application update of Camera Connect, iOS, Android, etc. In such a case, features of the camera or Camera Connect may differ from sample screens or operation instructions in this manual.

Canon EOS 5D Mark IV Manual Guide

The Canon EOS 5D arrangement is ostensibly a standout amongst the most unmistakable camera lines of the computerized age and the Mark IV is intended to speak to the same extensive variety of lovers and experts. Almost indistinguishable looking to its antecedent, it receives considerable redesigns in the engine, including: a higher-determination sensor with Dual Pixel self-adjust, 4K video catch, an overhauled AF framework, a touchscreen, enhanced climate fixing, worked in Wi-Fi/NFC, an interim clock and GPS. This means a camera that fits into Canon's product offering pleasantly as the inside and out full-outline choice.

Canon EOS 5D Mark IV Manual

Canon EOS 5D Mark IV Manual

The EOS 5D Mark IV Manual camera expands on the intense legacy of the 5D arrangement, offering stunning refinements in picture quality, execution and adaptability. Canon's dedication to imaging incredibleness is the spirit of the Canon EOS 5D Mark IV. Wedding and representation picture takers, nature and scene shooters, and additionally creative video graphers will welcome the brightness and force that the EOS 5D Mark IV delivers. Brilliant picture quality is accomplished with Canon's all-new 30.4 Megapixel full-outline sensor, and very definite 4K video is caught easily.

Center precision has been enhanced with a refined 61-point AF framework and Canon's progressive Dual Pixel CMOS AF for brisk, smooth AF for both video and Live View shooting. Quick operation is upgraded with Canon's DIGIC 6+ Image Processor, which gives consistent shooting at up to 7.0 fps*. Worked in Wi-Fi, GPS and a simple to-explore touch-board LCD permit the camera to end up an expansion of you. At the point when quality matters, the EOS 5D Mark IV delivers results to motivate even the most perceiving imagemaker.
Canon EOS 5D Mark IV Manual

Canon EOS 5D Mark IV Far as AF

As far as AF, the expanded scope range is certainly a major ordeal: all things considered, it's precisely the same framework found in the organization's lead sports camera. The 150,000-pixel RGB-IR metering sensor, which bolsters scene data to the AF framework, is acquired from the first 1D X, bringing upgraded subject recognizable proof (counting countenances) and following ('iTR'), and enhanced metering and glint location. Tragically, we've observed iTR to be excessively circumstance subordinate, making it impossible to be for the most part depended upon, and our underlying impressions from our brief time with the Mark IV abandon us correspondingly unmoved at the camera's capacity to consequently move AF focuses to adhere to your predefined subject.


Canon EOS 5D Mark IV wi-fi Connection

EOS 5D Mark IV tutorial In Wi-Fi (Wireless Communication) Function Basic Instruction Manual, basic operation procedures for easy-to-use “Communicate with a smartphone” and “Save images to Connect Station” are explained.

Canon EOS 5D Mark IV Self Cleaning Sensor

The camera has a Self Cleaning Sensor Unit to naturally shake off dust stuck to the picture sensor's front layer (low-pass channel). The Dust Delete Data can likewise be affixed to the picture so that the dust spots remaining can be erased naturally by Digital Photo Professional

Canon EOS 5D Mark IV GPS

Canon EOS 5D Mark IV clarifies the camera's inherent GPS settings. The EOS 5D Mark IV (WG) can get satellite route signals from GPS satellites (USA), GLONASS satellites (Russia), and Quasi-Zenith Satellite System (QZSS) "Michibiki" (Japan).

Canon EOS 5D Mark IV Specifications

Price
MSRP $3499 (body only), $4399 (w/24-70 F4L lens), $4599 (w/24-105 F4L IS USM lens)
Body type
Body type Mid-size SLR
Body material Magnesium alloy
Sensor
Max resolution 6720 x 4480
Image ratio w:h 1:1, 4:3, 3:2, 16:9
Effective pixels 30 megapixels
Sensor photo detectors 32 megapixels
Sensor size Full frame (36 x 24 mm)
Sensor size notes sRaw suppoorted in all aspect ratio. Size between 5 and 7.5 megapixel.
Sensor type CMOS
Processor Digic 6+
Color space sRGB, AdobeRGB
Color filter array Primary color filter
Image
ISO Auto, 100-32000 (expands to 50-102400)
Boosted ISO (minimum) 50
Boosted ISO (maximum) 102400
White balance presets 6
Custom white balance Yes
Image stabilization No
Uncompressed format RAW
JPEG quality levels Fine, normal
File format • JPEG (Exif v.2.3)